Miele PFD 404 U - Adjustable Toe-Kick Panel (Depending on the Model)

Installation
*INSTALLATION*
102
Adjustable toe-kick panel
(depending on the model)
Dishwashers with internal dispensing or ac-
tive drying have an adjustable toe-kick panel.
 Level the dishwasher.
 Open the dishwasher door halfway and
loosen the two screws now visible at the
top of the toe-kick panel.
 Pull the toe-kick panel upward first and
then forward.
 Loosen the two screws on the right and
left of the toe-kick behind the panel.
 Pull the inside of the toe-kick down to the
floor.
 Tighten the two screws again.
 Reassemble the toe-kick panel by follow-
ing the instructions above, but in reverse
order.
Removing the machine lid
If the dishwasher is installed with a lid, it can
be removed as follows:
 Remove both securing screws on the back
of the dishwasher with a screwdriver.
 Open the door.
 Unscrew the left and right fastening
screws with a screwdriver.
 Lift the machine lid upward to remove.