Miele PFD 404 U - Status Window; Fault Messages

Operation tips
21
Depending on the context, numbers en-
tered directly may be rounded up or down.
If, for example, it is only possible to enter
values in increments of 10 (10, 20, 30,
etc.), the value is rounded down to 10
when you enter 12, and rounded up to 20
when you enter 15.
Status window


Target temperature:
66°C
Actual temperature:
51°C
Information
AutoOpen
A colored bar is shown at the top of the dis-
play. If you tap this and drag it down, a sta-
tus window opens. You can use this to dis-
play various status messages, e.g., about the
program in progress.
System messages

OK
Refill salt -appliance will be locked
shortly.
The symbol denotes system messages.
These give information about current pro-
cesses and the status of the machine. Sys-
tem messages are displayed at the end of
the program. If there is more than one sys-
tem message, they are shown one after the
other and must be acknowledged individu-
ally by pressing OK.
Show me how
OK
Refill salt
Then start the “Rinse” program.

Help
If you are notified of a fault or defect when
switching on the machine or at the end of
the program and the Helpbutton is pre-
sented to you, you can tap the Helpbutton
to be guided through the individual steps to
be carried out in order to eliminate the fault
or defect.
Fault messages

In the event of a fault, a warning symbol
appears on the display and the Start/Stop
button flashes red in rapid succession. If au-
dible signals are activated, a warning tone
will also sound.
 Acknowledge the fault by tapping on the
warning symbol. Then follow the instruc-
tions on the display and in the “Frequently
asked questions”.