Electrical connection
*INSTALLATION*
106
Peak-load negotiation
The dishwasher is suitable for use in an en-
ergy management system. For this purpose,
the dishwasher must be technically adapted
and the controls reset by Miele Customer
Service.
Please contact Miele Customer Service for
additional information.
Load management
In the event of a peak-load negotiation,
some dishwasher components, such as the
heater elements, will be switched off for a
while. The dishwasher will remain on during
this period and the current program will not
be interrupted. If one of the components
that is switched off is needed during the cur-
rent program stage, the program cycle time
will simply increase for the duration of the
load negotiation.
Load negotiation is indicated by the follow-
ing message, e.g.:
Peak-load negotiation:
Heating mode temporarily
disabled.
To Next Page
Loading...
