Miele PFD 404 U - Filter Program Lock; Standby;Off

Additional settings
61
Filter program lock
The filter combination in the wash cabinet
filters coarse dirt particles out of the wash
water. If dirt particles enter the circulation
system, they may clog the spray arms,
valves, etc.
It is possible to stop the program from start-
ing if the micro-fine filter has been inserted
incorrectly or is missing.
The menu is saved under the following input
path.
Extended settings
Program lock filter

08:15
Off
On
Program lock filter
- On
Programs are prevented from starting if
the micro-fine filter has been inserted in-
correctly or is missing.
A program can only be started when the
micro-fine filter is inserted correctly.
- Off
Programs can be started regardless of the
status of the micro-fine filter. A confirma-
tion prompt is displayed, which must be
confirmed if the micro-fine filter is not in-
serted correctly.
 Select an option.
Standby/Off
If the dishwasher has not been used for
10minutes, it can be set to standby or
switched off automatically.
In standby mode, the dishwasher remains
switched on and the Start/Stop button
flashes. The dishwasher can be reactivated
by pressing the Start/Stop button, touching
the display, or opening the door.
After automatic switch-off, the dishwasher
is switched off and can be switched on again
by pressing the button.
The menu is saved under the following input
path.
Extended settings
Standby/Off

08:15
Standby/Off
Standby after
10 min
Off after 10 min
- Standby/Off
Switch to standby mode after 10minutes
- Off after 10 min
Switch off after 10minutes.
 Select an option.