Miele PFD 404 U - Rinsing Dispensing Paths

Machine functions
50
You will then be asked if you want to start
the filling process, e.g.:

08:15
Start filling dispensing paths?
Yes No
 Select Yes to start the process.
The dispensing system is filled automati-
cally. The message Filling of dispensing
paths completed is displayed following
successful completion. If filling is inter-
rupted prematurely, the process must be
repeated.
 Cancel the process at this point by selecting No.
Rinsing dispensing paths
A dispensing system must be rinsed in the
following situations:
- If a dispensing system was accidentally
filled with the wrong medium.
- If deposits have formed in the dispensing
paths or in the containers, which could
completely or partially clog the systems.
Deposits can form, for example, after long
periods of downtime or when the contain-
ers are refilled instead of being replaced.
 Fill a clean container, e.g., a bucket, with
clear, clean water.
 Damage to the dispensing system.
Small foreign objects in the water, such as
sand, lint, or similar, can be sucked in by
the dispensing system and may clog or
damage it.
Make sure that there are no foreign ob-
jects in the water.
 Place the suction wand in the container
with the water. The lower end of the suc-
tion wand with the suction opening must
be thoroughly rinsed.
 Secure the suction wand so that it cannot
tip over or fall out of the container.
The menu is saved under the following input
path.
Machine functions
Dispensing systems
Rinse dispensing paths

08:15
Rinse aid
canister
Cleaning agent
canister
Rinse dispensing paths
- Cleaning agent canister
Rinse the cleaning agent dispensing sys-
tem.
- Rinse aid canister
Rinse the rinsing agent dispensing system.
 Select the dispensing system that you
want to rinse.
You will then be asked if you want to start
the process, e.g.:

Start rinsing dispensing
paths?
Yes No
 Select Yes to start the process.
The dispensing system is rinsed automati-
cally. The message Rinse dispensing paths
completed is displayed following success-
ful completion. If rinsing is interrupted pre-
maturely, the process must be repeated.
 Cancel the process at this point by select-
ing No.