Miele PFD 404 U - Changing the Name; Interim Rinse; Resetting Parameters

Additional settings
66
Changing the name
You can change a program name if required.
The preceding symbol cannot be changed.
 Select the Program name option.
Names can consist of up to 15characters in-
cluding spaces. The following options are
available for naming:
- Letters from A to Z;
each new word will automatically start
with a capital letter.
- Numbers from 0 to 9.
- Spaces.
- Use the symbol to delete the last entry.
- Select Reset to reset the program names
to the factory default.
- Press the button to end the process
without saving the name change.
 Enter the name.
 Confirm your entry by pressing OK.
Interim rinse
If required, an additional interim rinse block
can be activated for selected programs.
You can find out which programs support
this function in the “Program overview”.
- On
Activates the additional interim rinse block
for the selected program.
- Off
Deactivates the additional interim rinse
block.
 Tap to select an option.
Resetting parameters
You can reset individual programs to the fac-
tory default settings. The program parame-
ters and changed program names are reset.

Only reset program settings?
Yes No
 Select Yes to reset the parameters and
program names to the factory default set-
tings.
 Select No to cancel the process.