Miele PFD 404 U - Page 97

97
Program Model
(see data plate)
Program sequence
1.
Pre-wash 1
2.
Pre-wash 2
3.
Main wash 1
, 
4.
Interim rinse 1
5.
Interim rinse 2
6.
Final rinse 1
, 
7.
Dry+

8.
AutoOpen
China & Crystal
PFD401
X
120°F (50°C)
1min
X (X) X
120°F (50°C)
1min
− −
PFD404
X
120°F (50°C)
1min
X (X) X
120°F (50°C)
1min
− −
Glasses
PFD401
X
120°F (50°C)
1min
X (X) X

1min
− −
PFD404
X
120°F (50°C)
1min
X (X) X

1min
− −
Utensils
PFD401
X X
140°F (60°C)
2min
X (X) X
131°F (55°C)
1min
− −
PFD404
X X
140°F (60°C)
2min
X (X) X
131°F (55°C)
1min
− −
X Scheduled program block (X) Additional program block; deactivated ex-works
(activated by Customer)
− Program block not available for this program or program not avail-
able for this model
 Temperature adjustable from 85-185°F (30–85°C)
Except: –Rapid program adjustable to max. 160°F (70°C)
 Holding time adjustable from 0–10minutes
Except: –Rapid program adjustable from 0–255seconds
 Cold water without rinsing agent
*) Important note for the Rapid program
With the Rapid program, water from the final rinse is not pumped away at the end of the program. It will be used as the cleaning water in the next Rapid program. If the water temperature drops below 105°F (40°C) or if another program is started, this water will be automatically pumped away when the program starts.