Settings menu
86
WPS push button
As an alternative to networking your
dishwasher via the MielePro@mobile
app, we recommend using WPS
(Wireless Protected Setup). To do so
you will need a WPS-compatible router.
Select the WPS push button menu
option.
Please wait will appear in the display.
Activate the “WPS” function on your
router within two minutes.
Once connection has been
established, confirm the message
with OK.
The dishwasher will then revert to the
Miele@home enabled menu.
If the connection fails, you have
probably not connected WPS to your
router quickly enough. Repeat the steps
above.
SmartStart
The SmartStartfunction is used for
starting your dishwasher automatically
at a time when your energy costs are
most economical.
If the Permitted SmartStart option has
been activated, SmartStart will appear in
the “FlexiTimer” menu of the
selected program instead of EcoStart.
The dishwasher will then start within the
timeframe specified when it receives a
signal from the energy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the dishwasher will start
automatically.
Select the setting you want and
confirm with OK.
Confirm the message with OK.
To Next Page
Loading...
