Miele PG 8130 U - Page 87

Settings menu
87
Remote control
Once you have installed the
MielePro@mobile app on your tablet PC
or your smartphone, you will be able to
operate your dishwasher remotely. Your
dishwasher must be signed on to a WiFi
network and the Remote controlfunction
must be activated.
 Select the setting you want and
confirm with OK.
 Use the Back  option to get into the
Settings  menu.
 Use Finish to leave the Settings 
menu.
 Select the Settings option again.
Once you have activated the Remote
controlfunction, the MobileControl option
will be the first option listed under
Settings.
In order to operate the dishwasher with
the MielePro@mobile app, please
activate the MobileControl function.
 Confirm the MobileControl option with
OK.
 Close the door and press the Start
button.
The Start indicator light will come on
and Remote active will appear in the
display.
The dishwasher can now be operated
remotely using the MielePro@mobile
app.
If the time of day (clock) display has
been switched off (see “Settings
menu, Time of day”) the display will go
out if you have activated a Delay start
time or remote control after a few
minutes and only the Start indicator
light will flash slowly.
Press any button to switch the display
back on again for a few minutes.
If you now do not wish to operate the
dishwasher remotely with the
MielePro@mobile app, you can cancel
the MobileControl function.
 Switch the dishwasher off with the
button.
System settings
This function is reserved for Miele
Service and used to add your
professional machine to your network
manually.