Settings menu
88
Module settings
We recommend connecting your
dishwasher to your WiFi network using
the MielePro@mobile app or via WPS.
If you would rather set up the
connection to your router yourself, or
you have a special network
configuration, you can enter the
relevant settings with the necessary
technical knowledge.
Start module activity
If you wish to reset all entered settings
and values for Miele@home, you can
restore the factory default settings on
your WiFi module. Any settings that do
not affect Miele@home will remain
unchanged.
Select Default settings and confirm
with OK.
Please wait will appear in the display.
The message Module status: Process
successful will appear in the display after
a few minutes.
Confirm the message with OK.
The WiFi module factory default
settings have been restored.
If the factory default settings were not
restored to your WiFi module, repeat
the instructions above.
To Next Page
Loading...
