Miele PG 8504 - Dispensing Powder Cleaning Agents

Adding and dispensing chemical agents
53
Dispensing
powder cleaning
agents
 Take care not to inhale powder cleaning agents.
Swallowing process chemicals can cause chemical burns in the
mouth and throat or lead to asphyxiation.
 Add powder cleaning agent to the dispenser with the symbol
before starting the programme. Do not dispense powder cleaning
agent in the Rinsing and Drain programmes.
 Press the yellow button on the dispenser with the  symbol.
The flap will spring open. The flap is always open at the end of a
programme cycle.
The level markers in the powder container with the door in the
horizontal position equate to the amount dispensed in millilitres (ml).
The max. capacity is approx. 60ml of cleaning agent.
The amount in ml equates to approx. the amount normally
recommended in grams (g) for proprietary powder cleaning agents.
Powder density can affect this amount.
Dispensing example:
Approx. 10.5l of water are taken into the machine for the main
wash. With a cleaning agent concentration of approx. 3g/l, you will
need approx. 30g of cleaning agent. Please observe manufacturer’s
recommendations, which may vary!