Further settings
75
Temperature unit
During a programme the temperature display is refreshed every 2 to 5
seconds depending on the programme stage. The temperature can
be displayed in degrees Celsius (°C) or Fahrenheit (°F).
The temperature unit is set at the factory to °C.
When the temperature unit is changed to °F, the temperature
displayed is automatically recalculated.
Open the Further settings menu by switching the machine off with
the button and then switch it on again with the button whilst
keeping the button held in.
Open the menu as follows:
Further settings
Temperature unit
- °C
Display temperature in degrees Celsius.
- °F
Display temperature in degrees Fahrenheit.
Select an option using the and arrow buttons.
Press OK to save the setting.
To Next Page
Loading...
