Further settings
88
Display brightness and contrast
You can use this menu to adjust the brightness and contrast of the
display.
Open the Further settings menu by switching the machine off with
the button and then switch it on again with the button whilst
keeping the button held in.
Open the menu as follows:
Further settings
Display
Display
Brightness
Contrast
- Contrast
Set the contrast.
- Brightness
Set the brightness.
Select an option using the and arrow buttons.
Confirm your selection with OK.
Brightness
BrighterDarker
Contrast
Lower Higher
Contrast and brightness are shown as a bar chart in the display.
Use the arrow buttons (Higher/Brighter) and (Lower/Darker) to
set the brightness and contrast you want.
Press OK to save the setting.