Miele PG 8504 - Dispensing Systems

Further settings
80
Dispensing
systems
Individual dispensing systems can be activated or deactivated for all
programmes as follows.
...
Dispensing system
DOS... (name of dispensing system)
DOS
Inactive
Active
- Active
The selected dispensing system is activated. Dispensing will only
occur in the appropriate wash blocks (see Programme charts).
- Inactive
The selected dispensing system is deactivated for all programmes.
 Select an option using the  and  arrow buttons.
 Press OK to save the setting.
If the dispensing systems have been activated (Active) the following
options are also available:
- DOS venting
Vent the dispensing system.
- Concentration
Set the dosage concentration level. The setting applies to all
programmes.
- Change name
Change the name of the dispensing system.
With DOS 2 Rinsing agent the only option shown is Concentration.