Change the operating level
Four operating levels are available for the electronic control
unit of the washer-disinfector,
Operating
levels
Authorized access for
A and B Select from a list of approved programs.
C Automatic program assignment by mobile unit
code.
D Open program selection through the Program
overview, Programming and Settings J menus.
The context menu can be used to switch between operating
levels.
To help prevent unauthorized access to the settings, a code
is required to change operating levels.
To change the codes for existing users, or to enter new
users, you must be a registered administrator. The
Administrator is set by Miele Customer Service.
^ Simultaneously press the buttons -efor at least 2
seconds.
The context menu appears in the display:
Context menu B
Current fault
Change display language F
Change operating level
#
Context menu
20
To Next Page
Loading...
