Change the heating type
In convertible washer-disinfectors, you can use the context
menu to change the heating type - e. g. from electric to steam
heating.
^
Select
Steam/Electric, confirm with OK to activate.
^
Change the heating type as desired, e.g.,
Steam/Electric,
confirm with OK.
The new heating type is saved.
^
To leave the context menu, use +C.
Current Faults
This menu item can be used to read the current fault
messages.
^ Select the menu item and confirm with OK.
The current fault messages are displayed.
^ Use OK to scroll through the fault messages.
^ To leave the context menu, select +C.
Context menu
24
To Next Page
Loading...
