Miele PG 8528 - Program Sequence; End of Program; How to Switch off; Cancelling a Program

Program sequence
Once started, the program proceeds
automatically.
As it proceeds, the program steps are
shown in the display.
Detailed information on the program
sequences is available in the
"Programming manual".
,
Do not change the printer paper
roll or ribbon cartridge during a
running program.
End of program
Once the program ends, you will see
Programme finished in the display.
How to switch off
^ Press the s (ON/OFF) button.
If the machine is to be left off for
several days, be sure to turn the main
switch to 0-OFF.
Cancelling a program
A program can only be interrupted
or cancelled in operating levels B
and D.
In operating levels B or D
^
Press the +C button.
The program is interrupted.
The following prompts appear in the
display:
Cancel programme (OK)
or continue (Clear)?
,
In cases involving mandatory
decontamination, disinfectant must
be added to the contaminated water
before it can be released into the
public water system. The door on
the unclean side can be opened for
this purpose.
^ Confirm the program interruption with
the OK button.
Programme cancelled, Water
drainage
appears in the display.
After the water has drained away, the
program sequence appears in the
display.
Operating the machine
40