Periodic checks
This washer-disinfector should be
inspected in accordance with local and
national safety regulations after every
1000 operating hours or every 6 months
by a Miele approved service
technician.
This maintenance will cover the
following:
–
Electrical safety tests
–
Door mechanism and door seal
–
Any screw connections and
connectors in the wash cabinet
– Water inlet and drainage
– Internal and external dispensing
systems
– Spray arms
– Filter combination
– Sump including drain pump and
non-return valve
–
Steam condenser
–
All mobile units, modules and inserts
and where applicable:
–
The drying unit
–
Any printer connected to the
machine
The following operational tests will be
carried out within the framework of the
maintenance:
–
A program will be run as a test run
–
Thermo electrical measurements will
be taken
–
Seals will be tested for water
tightness
–
All relevant measuring systems will
be safety tested including error
message displays
Maintenance
44
To Next Page
