Mobile units, baskets and
inserts
To ensure that the mobile units, baskets
and inserts function properly, they must
be checked daily. A checklist is
supplied with the washer-disinfector.
Check the following points:
–
Are the rollers in proper condition
and are they securely attached to the
mobile unit / insert?
–
Are the counter-nuts on the guide
rails firmly secured?
– Is the mobile unit connection
correctly set and firmly screwed on?
– For mobile units in the modular
system, are the caps in the module
connections working properly?
– Are all spray jets, spray sleeves and
hose adapters securely attached to
the mobile unit / insert?
– Are all spray jets, spray sleeves and
hose adapters unclogged so that
water can flow through?
–
Are all caps, covers and fasteners
securely attached to the spray
sleeves?
If there are spray arms:
–
Do the spray arms rotate freely?
–
Are the spray jets clogged? See the
section on "Cleaning and Care /
Cleaning the spray arms".
–
Are the screws in the magnet rails for
Automatic Mobile Unit Recognition
tightly secured?
–
Are the magnets in place on the
spray arm ends?
–
Are the magnets on the spray arms
free of attached metal parts?
Maintenance
50
To Next Page
Loading...
