Miele PG 8581 - Page 120

Frequently asked questions
120
Problem Possible cause and solution
The wash items are
flecked.
The rinsing agent container is empty.
 Refill the container.
The rinsing agent concentration is set too low.
 Contact Miele Service and have the dispensing concen-
tration reset.
The cleaning result is un-
satisfactory.
Mobile units, baskets, modules and inserts were not suit-
able for the load.
 Select mobile units, baskets, modules and inserts which
are suitable for the task.
Mobile units, baskets, inserts and modules were incorrectly
loaded or overloaded.
 Arrange the wash load correctly according to the infor-
mation in the operating instructions.
 Avoid overloading the mobile units, baskets, modules
and inserts.
The program was not suitable for the soiling.
 Select a suitable program.
or
 Adjust the parameters to suit the task.
Soiling has been left to dry on the wash load for too long.
 Soiling should not be left on the load for more than
6hours before machine reprocessing.
A spray arm is blocked.
 Ensure the spray arms are not obstructed when arrang-
ing the wash load.
Injector nozzles on the mobile units, baskets, modules or
inserts are blocked.
 Check the nozzles and clean them as necessary.
The filters in the wash cabinet are dirty.
 Check the filters and clean them if necessary.
Mobile units, baskets or modules were not correctly
mounted on the water connection.
 Check the adapter.