Additional settings
79
Test program
Various programs are available for monitoring cleaning performance
in routine testing.
See “Maintenance” for more information on these programs.
Filter maintenance
Cleaning the fil-
ters in the
wash cabinet
The filters in the wash cabinet must be checked daily and cleaned
regularly; see “Maintenance/Cleaning the filters in the wash cabinet”.
A counter in the controls can be activated to remind you of the re-
quired cleaning at regular intervals.
Cleaning the
A 800 tubular filter
The A 800 tubular filter can be used in special injector bars on various
mobile units and baskets and must be cleaned regularly. Follow the
cleaning instructions in the operating instructions for the tubular filter.
A counter in the controls can be activated to remind you of the re-
quired cleaning at regular intervals.
Activating and
setting the inter-
val
Open the menu as follows:
button
Additional settings
Filter maintenance
Filter combination and/or Tubular filter
Inactive
Active
Inactive
Active
Filter combination Tubular filter
- Active
The cleaning interval is activated.
The Active selection allows you to reset the counter or set the
cleaning interval.
- Inactive
The cleaning interval is deactivated.
Use the and arrow buttons to select an option and press OK to
confirm your selection.
To Next Page
Loading...
