Additional settings
84
Water hardness
You can use this menu to set the water softener to the hardness of
the water supply.
For more information see “Water softener.”
Display: Temperature
The wash cabinet temperature can be viewed during a program.
Either the current actual temperature or the required temperature
which has been preset for the current wash block is displayed.
Open the menu as follows:
button
Additional settings
Display view
Display view
Actual temperature
Required temperature
- Actual temperature
Display the current actual temperature in the wash cabinet.
- Required temperature
Display the required temperature which has been preset for the cur-
rent wash block. If a temperature has not been set, a dotted line ---
is shown.
During a program, both settings are displayed together as Tempera-
ture. There is no breakdown of actual and required temperature.
Select an option using the and arrow buttons.
Press OK to save the setting.
To Next Page
Loading...
