Operation
57
Canceling a program
If a program is canceled, the items in the machine must be re-
processed again.
Be careful when opening the door!
The load could be hot. Risk of scalding, burning and chemical
burns.
Program canceled
due to a fault
The program stops prematurely and an error message appears in the
display.
Take appropriate steps to resolve the fault, depending on its cause
(see “Frequently asked questions”).
Canceling a pro-
gram manually
A program which is already running should only be canceled if neces-
sary, e.g. if the wash load is moving in the chamber.
Press and hold the Start/Stop button until the display changes to
the following view:
Use the and arrow buttons to select Yes.
Pressing the OK button interrupts the program. Entry of a code may
also be required (see “Additional settings/Code”).
If no button is pressed for several seconds, or if the process is can-
celed using the button, the display will revert to the program se-
quence display.
Restarting the
program
Start the program again or select a new program.
To Next Page
Loading...
