Operation
24
Symbols in the display
Navigation arrows
If a menu consists of more than two options, two navigation arrows
are shown at the side of the menu options.
Use the and arrow buttons on the control panel to navigate
through the menu.
- - - - - -
Dotted line
If a menu contains more than two options, the end of the option list is
marked by a dotted line. The last entry appears above the line, the
first entry below it.
Check
If there are several options available, the current setting is marked
with a check .
Language
english (GB)
english (USA)
(
System messages
The symbol denotes system messages. These give information,
such as a notification of an excessively low level in the supply con-
tainers or a reminder for the next service.
System messages are displayed at the start and end of a programme
and have to be confirmed (acknowledged) individually with OK or all
together at the end of the programme by opening the door. If the
symbol is shown on the display, the system messages can be
opened by pressing the OK button.
Fault messages
In the event of a fault, a warning triangle is shown in place of the
symbol. See “Problem solving guide” and “After sales service” for
more information.
To Next Page
Loading...
Need help?
General
