Operation
58
System messages
After the machine is switched on or a program sequence is com-
pleted, a series of system messages may be shown on the display.
These indicate e.g., low fill levels in the containers or required mainte-
nance.
Cleaning the filter
combination and
tubular filter
The filters in the wash cabinet must be checked daily and cleaned
regularly; see “Maintenance/Cleaning the filters in the wash cabinet”.
The A 800 tubular filter can be used in special injector bars on various
mobile units and baskets and must be cleaned regularly. Follow the
cleaning instructions in the operating instructions for the tubular filter.
A counter in the controls can be activated to remind you of the re-
quired cleaning at regular intervals.
Clean tubular filter?
Clean filter combination?
Now
Later ( Programmes)
Now
Later ( Programmes)
Follow the instructions in the “Maintenance” section for cleaning the
filters. For the tubular filter, follow the instructions in the operating
instructions for the tubular filter.
Resetting the
counter
The counter for the cleaning interval may be reset only after clean-
ing has been completed.
Tubular filter cleaned?
Filter comb. cleaned?
Yes
No
Yes
No
- Yes
The counter is reset.
- No
The counter will not be reset.
Select an option using the and arrow buttons and confirm your
choice with OK.
To Next Page
Loading...
