Frequently asked questions
124
Printer/serial interface
Problem Possible cause and solution
Serial printer fault: no paper The printer has run out of paper.
Replenish the paper.
Serial printer fault: offline The machine cannot connect to the printer.
Switch the printer on.
Check the connection between the machine and the
printer.
If in doubt, have the configuration of the interface
checked by a qualified person.
If the printer has been replaced, the printer type must be
adjusted in the interface configuration.
Serial printer fault: general
fault
The printer is not ready for operation.
Check the printer for fault messages.
Change the printer cartridge if necessary.
Network down The communication module has identified a network inter-
ruption or cannot establish a connection.
Consult your network administrator.
If the problem cannot be resolved:
Contact Miele Service.
To Next Page
Loading...
