Miele PG 8581 - Setting Water Hardness Level

Water softener
28
Setting the water hardness level
Water hardness can be set between 0 and 70 gr/gal (0 - 70°dH).
 Open the menu as follows:
button
Additional settings
Water hardness
Water hardness
19
(0 - 70
°dH
°dH)
The bottom line of the display shows the possible input range.
Water hardness input values can be found in the chart on the next
page.
Where the water hardness fluctuates, e.g. between 8 - 18gr/gal (8 -
18°dH), always program the machine to the higher value, 18gr/gal
(18°dH) in this example.
 Set the water hardness level using the arrow buttons ( = higher
and  = lower).
 Press OK to save the setting.