EasyManua.ls Logo

Miele PWM 307 - Adding Detergent

Miele PWM 307
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Adding detergent
29
You can use any detergent that is suit-
able for washing machines.
Detergent dispensing
Please follow the detergent manufac-
turer's instructions in relation to
dosage.
Adding too much detergent will lead
to excessive foaming.
Avoid adding excess detergent.
The amount to dispense will depend on:
- the amount of laundry
- the amount of soiling in the laundry
- the water hardness
Hardness
range
Hardness
inmmol/l
Degree of
German hardness
°dH
I (soft) 0-1.5 0-8.4
II (medium) 1.5-2.5 8.4-14
III (hard) above 2.5 above 14
Check with your local water supplier if
you do not know the water hardness in
your area.
Adding detergent
Pull out the detergent drawer and add
detergent to the compartments.
Detergent for the pre-wash (di-
vide the total recommended
amount as follows: ⅓ to com-
partment and ⅔ to compart-
ment)
Detergent for the main wash
Fabric conditioner or liquid
starch
For disinfection programmes, the
andcompartments can be
filled with detergent for the main wash
if you have not selected pre-wash.

Table of Contents

Related product manuals