EasyManuals Logo

Miele PWM 307 User Manual

Miele PWM 307
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
Supervisor level
72
Delay start
The type of time input for the Delay
start function can be changed or
switched off.
- Off
The Delay start function is not avail-
able for selection.
- End of programme (factory default)
With the Delay start function, you
specify at what time the wash pro-
gramme should end.
- Beginning of programme
With the Delay start function, you
specify at what time the wash pro-
gramme should begin.
- Time until start
With the Delay start function, you
specify after how many hours a pro-
gramme should begin.
SmartStart
The function of the sensor control
changes when the SmartGrid setting
is activated and the Time until start
option is selected in the Delay start
setting. The period of time in which
the wash programme will start auto-
matically is then shown in the display:
SmartStart
The programme is started via an ex-
ternal signal.
The time period can be defined up to
24hours. During this period, the wash-
ing machine waits for the external sig-
nal. If no signal is sent during the
defined period, the washing machine
starts the drying programme once the
defined period of time has elapsed.
Programme name
When selecting a standard pro-
gramme, the name of the selected
programme is shown in the display.
- On (factory default)
When a programme is selected, the
programme name is displayed for a
few seconds before the display
shows the main menu.
- Off
The main menu is displayed immedi-
ately.
Visibility parameters
Various parameters are offered/dis-
played when a programme is selected.
You can decide which parameters
should not be displayed. These para-
meters can then not be edited during
programme selection.
Factory default: all parameters are vis-
ible.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PWM 307 and is the answer not in the manual?

Miele PWM 307 Specifications

General IconGeneral
Current10 A
Connected load2400 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy efficiency scaleA to G
Power consumption (off)0.4 W
Water consumption per cycle37 L
Energy consumption washing per cycle- kWh
Package depth768 mm
Package width660 mm
Package height944 mm
Package weight102000 g
Door colorSilver
Door hingeRight
Water fillCold
Cord length2 m
Drum volume64 L
Control typeRotary, Touch
Loading typeFront-load
CertificationCE, VDE EMC, VDE, WEEE
Product colorWhite
Built-in displayYes
Inlet hose length1.55 m
Custom panel-ready-
Door opening angle167 °
Illumination colorYellow
Outlet hose length1.5 m
Appliance placementFreestanding
Dispenser tray type3-way
Drum capacity7 kg
Cycle time (max)199 min
Delay start (max)24 h
Residual moisture48 %
Maximum spin speed1400 RPM
Noise level (spin)72 dB
Noise level (wash)50 dB
Number of washing programs12
Cycle time (quick washing program)15 min
Weight and Dimensions IconWeight and Dimensions
Depth714 mm
Width596 mm
Height850 mm
Weight98000 g
Door diameter300 mm

Related product manuals