Miele PWM 307 - FOC Programmes; Delete Paid Signal; Debounce Time

Supervisor level
81
FOC programmes
In coin mode, you can decide whether
the Drain/Spin programme can be used
for free.
Factory default: Off
Delete paid signal
The “Paid” signal in coin box mode
can be applied until the end of the
programme or discarded if the pro-
gramme is not started after 5minutes.
Factory default: Off
Debounce time
In coin mode, the debounce time for
the minimum payment signal that
must be applied can be adjusted.
- Factory setting: Short
For coin boxes where the falling coin
generates the paid pulse.
- Long
For central control units on a 230V
basis.