Supervisor level
80
Feedback signal to pay system
Setting the feedback signal for the
coin box.
- Factory default: Off
- End of programme
The feedback signal is sent at the
end of the programme.
- Release of the start button
The feedback signal is sent when the
start button is released.
- Start and programme end
The feedback signal is sent at the
start and end of the programme.
- Programme running
The feedback signal is sent con-
stantly between the start and end of
the programme.
Payment system lock
To avoid tampering, a programme lock
can be set up in programme control. If
the lock is applied, the programme is
interrupted and payment credit is lost
as soon as the door is opened.
The time for the lock to be applied can
be adjusted to enable laundry to be ad-
ded.
- Off
- As soon as the programme starts
- 1minute after the start of the pro-
gramme
- 2minutes after the start of the pro-
gramme
- 3minutes after the start of the pro-
gramme (factory default)
- 4minutes after the start of the pro-
gramme
- 5minutes after the start of the pro-
gramme