Miele PWM 307 - Supervisor Level Settings; Accessing and Basic Settings

Supervisor level
69
The settings menu in the Super-
visor level is locked against unauthor-
ised access. The menu can be un-
locked with a code.
Code-based access
Supervisor level is accessed using a
code.
The code is 000 (factory default).
Changing the code
You can alter the Supervisor level ac-
cess code to protect the washing ma-
chine from unauthorised access.
Please inform Miele Service if you
have forgotten your new code. Miele
Service will have to reset the code.
Make a note of your new code and
store it in a safe place.
Opening the Supervisor level
 Touch the sensor.
The symbol appears in the display
if e.g. you turn the programme se-
lector to the Drain/Spinprogramme.

Supervisor
level
Access via code
Change code
 SelectAccess via code.
Enter code



OK
0
 Enter the individual numbers and
confirm each selection with OK.
The Supervisor level settings are
opened.

Supervisor
level


Language
Brightness
 Select the setting you want.
Some settings are only visible if ex-
ternal devices are connected via the
XCI box.
Exiting the Supervisor level
 Touch the sensor or switch off the
washing machine.