Miele PWM 307 - Changing Programme Sequence

Changing the programme sequence
36
A programme cannot be cancelled or
changed when operating a payment
system.
Changing a programme
After the start of a programme, it is no
longer possible to select a different pro-
gramme.
You will need to cancel the current pro-
gramme before you can select a new
one.
Programme cannot be changedappears
in the display if the programme se-
lector has been moved. The text dis-
appears when the programme selector
is set to the original programme.
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
 Touch the Start/Stopsensor control.
 Select Cancel programme.
The suds are pumped away. The pro-
gramme is cancelled. The door lock is
released.
 Pull open the door.
 Remove the laundry.
If you want to select a different pro-
gramme:
 Close the door.
 Select the programme you want.
 Add detergent to the detergent
drawer.
 Touch the Start/Stopsensor control.
The new programme will begin.
Switching on the washing ma-
chine after an interruption to
the power supply
If the washing machine is switched off
with the button during a wash pro-
gramme, the programme will be inter-
rupted.
 Switch the washing machine back on
with the button.
 Note the message in the display.
 Touch the Start/Stopsensor.
The programme will also be interrupted
if power is interrupted by a power cut.
 When power is resumed, confirm the
message in the display with OK.
 Touch the Start/Stopsensor.
The programme continues.