IMPORTANT SAFETY INSTRUCTIONS
10
If this machine is being used in a industrial environment, please en-
sure that all relevant health and safety regulations are obeyed and
testing is carried out in compliance with local and national regula-
tions. The test book for all necessary test documentation is available
from Miele Technical Service.
Please observe the instructions in “Installation and connection”
and “Technical data”.
The plug (if so equipped) for the washing machine must always be
kept accessible so that it can be easily disconnected from the power
supply.
If the machine is hard wired, a quick means of disconnect must be
installed in accordance with local code.
For hard-wired machines, a quick means of disconnect must be
provided on site. The isolator must be located in the immediate vicin-
ity of the washing machine and be easily recognizable, accessible
without hindrance.
A central Emergency shut off device must be available for models
without an Emergency shut off.
To Next Page
Loading...
Need help?
General
