Miele PWM 912 - Changing the Program Sequence; Changing a Program; Altering the Wash Program; Canceling a Program

Changing the program sequence
50
Changing a program
Altering the wash
program
Before selecting a new program, cancel the current program and se-
lect a new one.
Canceling a program
You can cancel a wash program at any time after it has started.
 Touch the Start/Stopsensor button.
The following will appear in the display:
Cancel the program?
 Selectyes.
The following will appear in the display:
Program cancelled.
The suds are pumped away.
 Wait until the door unlocks.
 Pull open the door.
 Remove the laundry.
Switching on the washing machine after a power failure
If the washing machine is switched off with the button during a
wash program, the program will be interrupted.
 Switch the washing machine back on with the button.
 Note the message in the display.
 Touch the Start/Stopsensor button.
The program will also be interrupted if power is interrupted by a
power outage.
 When power is restored, confirm the message in the display with
OK.
 Touch the Start/Stopsensor button.
The program continues.