Installation
41
Installing the washing machine
The washing machine must be installed by Miele Customer Service
or by an authorized dealer. Please observe the instructions in the
installation plan.
This washing machine is only intended for items of laundry that
have not been proofed with dangerous or inflammable substances.
To avoid the risk of frost damage, the washing machine must not be
located in rooms which may be subject to very low temperatures.
Transport the machine inside the room on a pallet jack.
Do not remove or alter the feet of the machine.
They could be damaged.
Remove packaging carefully with a suitable tool.
Lift the machine off the pallet using a pallet jack.
Securing the machine
The feet of the washing machine must be secured to the concrete
base using the fixtures and fastenings supplied.
Fittings supplied are for installation on a concrete floor. For other
types of flooring please purchase suitable fitting materials sepa-
rately.
General operating conditions
This washing machine is intended only for use in a industrial environ-
ment and must only be operated indoors.
Ambient temperature in installation room: 32°F (0°C) to 140°F (40°C).
Relative humidity: non-condensing
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Tip: Have the installation site inspected and seek the advice of a pro-
fessional in instances where increased noise may cause a nuisance.
To Next Page
Loading...
Need help?
General
