Supervisor level
55
- Switch off after 20minutes
- Switch off after 30minutes
Delay start
The delay start (timer) display can be switched on or off.
Factory default: On
Memory
The washing machine will save the settings (temperature, spin
speed, and some of the options) which have been selected for a
wash program after the program has started.
When the wash program is chosen again, the saved settings will ap-
pear in the display.
Factory default: Off
Temperature unit
You can select the unit for the temperature display.
Factory default: °C/Celsius
Weight unit
You can decide whether load quantities are displayed in “kg” or
“lbs”. You can also switch this information off altogether.
Factory default: kg
You can alter the access code to the Supervisor level.
Enter the current code.
Enter a new code.
To Next Page
Loading...
Need help?
General
