Supervisor level
52
Opening the Supervisor level
Switch on the washing machine.
11:02
Programs Favorites
Supervisor
Help
Touch the Supervisorsensor button.
The display will change to the Supervisor levelmenu.
Code-based access
The Supervisor level is accessed using a code.
The code is 000(factory default).
Changing the PIN code
You can alter the Supervisor level access code to protect the wash-
ing machine from unauthorized access.
Please inform Miele Technical Service if you have forgotten your
new code. Technical Service will have to reset the code.
Make a note of your new code and store it in a safe place.
Closing the settings menu
Touch the sensor control.
The display will then go back to the previous menu level.
Touch the sensor control.
The display will change to the main menu.
To Next Page
Loading...
Need help?
General
