Supervisor level
59
Water intake
Pre-wash
You can select the water type for the pre-wash.
- Cold
Only cold water is used for the pre-wash.
- Hot
Hot water is also added for the pre-wash.
Hot water can only be added if the wash temperature is above 86°F
(30°C).
Main wash
You can select the water type for the main wash.
- Cold
Only cold water is used for the main wash.
- Hot
Hot water is also added for the main wash.
Hot water can only be added if the wash temperature is above 86°F
(30°C).
Program cycle times will be longer if the washing machine is not con-
nected for hot water; this may mean that the “Time left” display is in-
correct.
First rinse
You can select the water type for the first rinse in some programs.
- Cold (factory default)
Only cold water is used for the first rinse.
- Hot
Hot water is also added for the first rinse.
Final rinse
You can select the water type for the last rinse in some programs.
- Cold (factory default)
Only cold water is used for the final rinse.
- Hot
Hot water is also added for the final rinse (only possible for pro-
grams with a temperature of at least 140°F /60°C).
Legal Information
Open Source Licenses
You can view information here (see WiFi data protection).
To Next Page
Loading...
Need help?
General
