Selecting program settings
25
Selecting a load
To enable load-specific dispensing, you can specify the load for
some programs.
Touch the Weightsensor button.
Enter a valid value for the load quantity.
The display will change to the Overviewmenu.
Selecting a temperature
You can alter the pre-set temperature of a wash program.
Touch the Temperaturesensor button.
Select the temperature you want.
The display will change to the Overviewmenu.
Selecting a spin speed
You can alter the pre-set spin speed of a wash program.
Touch the Spin speedsensor button.
Select the spin speed you want.
The display will change to the Overviewmenu.
Selecting Options
You can select extra options for some wash programs.
Touch the Extrassensor button.
Select one or more extra options.
Confirm with the OKsensor button.
The display will change to the Overviewmenu.
See “Options” for further information.
To Next Page
Loading...
Need help?
General
