EasyManua.ls Logo

Miele PWM 912 - Detergent Dispensing; Amount of Detergent; Water Hardness Levels

Miele PWM 912
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Washing with detergent compartment
28
Detergent dispensing
Detergent dis-
pensing
Avoid dispensing more than the required amount as this can cause
excessive foaming.
- Only use low foaming detergents.
- Dispense according to the detergent manufacturer's recommenda-
tions.
The amount to dispense will depend on:
- the amount of laundry
- the water hardness level in your area
- the type and level of soiling of the laundry
Amount of deter-
gent
Please dispense according to water-hardness levels and follow the
detergent manufacturer’s instructions.
Water hardness
levels
Hardness range gpg ppm
I (soft) 0 - 8.7 0 - 149
II (medium) 8.7 - 14.6 149 - 249
III (hard) Above 14.6 Above 249
Check with your local water supplier if you do not know the water
hardness level in your area.

Table of Contents

Related product manuals