Milestone HistosMATE - Unpacking and Checking List

HistosMATE
MM063-010 – Operator Manual
15
2.2. Unpacking and checking list
Check if your HistosMATE code corresponds to the voltage supply of the laboratory:
- CODE 65280: HistosMATE 220-240V~ 50/60Hz
- CODE 65281: HistosMATE 100-120V~ 50/60Hz
All parts of the equipment and all optional parts shall be supplied only by Milestone.
When unpacking, check that all parts correspond to the packing list included in the shipment.
Utmost care must be made during unpacking of the HistosMATE to avoid any scratch or damage to the
external coating.
HistosMATE codes 65280 e 65281 includes the following items:
1. HistosMATE unit
2. Items indicate in the table below
CODE
DESCRIPTION
Q.ty
IMAGE
50036
Power cord for units at
230V 50/60Hz
(Schuko)
1
50391
Power cord for units 100-
120V 50/60Hz (NEMA
5-15P).
1
50331
Black plastic tube 2.5 m
(8ft) long with metal
cable clamp to be used
to fix the hose to the
exhaust fume pipeline
1
62499
Draining Tube. This tube
must be connected to the
quick coupling to drain
exhausted reagents
1
65237
Stainless steel basket to
automatically remove
wax traces from metal
moulds and forceps
placed inside it
1