MM063-010 – Operator Manual
42
8. OPTIONAL AND SPARE PARTS
It is prohibited to use parts that are not supplied by Milestone.
The images shown are for illustrative purposes only.
Stainless steel holder,
suitable to host rectangular
stainless-steel racks (max
up to 3 racks with
dimensions: 160mm x
245mm x 52mm (6.3"x
9,65"x 2,05")
For racks other than Milestone, there is an adapter to be mounted on the HistosMATE support, making the
grooves on both sides coincide with the support rods.
Then insert the racks in the spaces as shown in the figure. Depending upon the type of basket, these can be
placed vertically or horizontally according to their size. The user must check the correct coverage of the
baskets by the cleaning reagent.
To Next Page
Loading...