MM063-010 – Operator Manual
28
Reagent allowed cycle: here you can enter the number of cleaning cycles before receiving the reagent
change message. Milestone suggest not to exceed 20 cycles.
Total number of cycles: it is shown the number of cleaning cycles done by the instrument.
Reagent executed cycles: number of cleaning cycles performed by the reagent in the cavity. By pressing
on the green icon "reset reagent use". The number of cycles performed by the reagent will be set to 0.
When exiting the page, always press SAVE in order to maintain the modifications
3.2.2. Info
Under the info icon there are two information pages with information about the software
version, serial number and all the necessary contacts for any assistance with the instrument.
The contact part is filled in at the time of installation, by clicking on each space, a virtual keyboard is
displayed where you can enter contact data.
When exiting the page, always press SAVE in order to maintain the modifications
To Next Page
Loading...