. A complete Parts List is available at www.MillerWelds.com
OM-272989 Page 16
SECTION 5 − INSTALLATION
5-1. Selecting A Location
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
1 Lifting Handles
Use handles to lift unit.
2 Line Disconnect Device
Locate unit near correct input
power supply.
18 in.
(460 mm)
18 in.
(460 mm)
2
! Do not move or operate
unit where it could tip.
Movement
Location And Airflow
loc_smallmig 2015-12
1
To Next Page
Loading...
