EasyManua.ls Logo

Miller PRO 300 - SECTION 4 - SPECIFICATIONS; 4-1. Weld, Power, And Engine Specifications; 4-2. Dimensions, Weights, And Operating Angles

Miller PRO 300
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OM-4422 Page 11
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Fire hazard from leaking
engine fuel. Fire can result from
welding on base at
non-designated areas causing
a possible fuel leak.
3 Fuel tank is located inside
base.
4 Do not weld on base of unit.
5 Weld only on supplied brackets
or bolt unit down.
1
5
34
2
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Electric shock from wiring can
kill.
3 Moving parts, such as fans,
rotors, and belts, can cut
fingers and hands and cause
injury. Keep away from moving
parts.
1
2
3

Table of Contents