Milli-Q Plus
A. INTRODUCTION
1. System Description
The Milli-Q Plus system is a state of the art water purification
system, designed to provide the final polish to water which has
been pretreated by primary purification methods such as
Reverse Osmosis (RO), Distillation, or Deionization (DI).
The system provides ultrapure water for the laboratory for use
in critical applications requiring the absence of interfering
inorganic, organic, particulate, or microbiological material.
As a result of attention to design detail, plus strict selection
and testing of materials of construction, resins, and other
purification media, the system consistently produces water which
exceeds Type 1 standards for Reagent Grade Water.
The Milli-Q Plus system utilizes a patented purification pack
concept.
The design of this pack ensures minimal dead water
volume and as a consequence extremely low TOC values in the
purified water. The pack is constructed of pure polypropylene and
is heat welded to minimize extractables associated with gluing.
The pack concept makes maintenance of the system extremely easy.
The system indicates when the pack requires to be changed and
this can be done quickly and easily without the use of any tools.
The control box of the system utilizes a membrane keypad combined
with an alphanumeric display. The alphanumeric display allows
the user to monitor the status of the Milli-Q Plus system at all
times.
To Next Page
Loading...
