Page 26 of 32
Milliflex
®
empty cassette for liquid
media (item MXLMC0120)
Use the following steps to prepare a liquid
medium cassette:
• Remove the yellow cap from the
cassette
1
• Open the ampoule of medium by
twisting off the ampoule top.
2
• Insert the male Luer tip of the ampoule
into the female Luer opening of the
cassette.
• Squeeze the ampoule to dispense the
medium into the cassette. Use the entire
content of the ampule.
3
Note: Avoid pressing the cassette on
the working surface while inserting the
media, since this might compress the pad
and slow the introduction of the media.
• Remove the empty ampoule and firmly
attach the yellow cap. The protective
Tyvek
®
paper cover remains on the
cassette. Remove it before using the
cassette.
Yellow
Cap
Liquid Medium
Cassette
1
Liquid Medium
Ampoule
Ampoule
Twist-o Top
Squeeze the
tube until empty
Tyvek
®
Paper Cover
2 3
Figure 49: steps to prepare a liquid media cassette
To Next Page
Loading...
