KEYPAD
In the RUN mode, the following programmer keys perform the identified functions.
selects the Auxiliary Reading "mA output value for the Point Number displayed".
selects the Auxiliary Reading "vessel atmosphere temperature".
selects the Auxiliary Reading "rate of material level change".
selects the Auxiliary Reading "failsafe time left" (in percent).
selects the Auxiliary Reading "parameter value" ( Key in any Parameter Number ).
selects the Auxiliary Reading "material level" ( may be operator altered via P731 ).
selects the Auxiliary Reading "distance" ( material level to transducer face ).
initiates program mode access ( see ).
switches the Reading between "Units / percent of Span" ( completes program mode access ).
stops / starts the Point Number auto display scroll.
selects the next Point Number ( and stops the auto display scroll ).
selects the previous Point Number ( and stops the auto display scroll ).
%
Auxiliary Reading Keys
Function Keys
%
%
PL-532 30
To Next Page
Loading...
