IMPORTANT AIRANGER XPL PLUS FEATURES
FIXED FEATURES
ENCLOSURE: Chemical resistant, light weight, dust tight, liquid tight, easy to work with.
LCD: Large digits for Reading and programming value displays.
Graphic Symbols for continuous indication of operating conditions.
PROGRAMMER: 20 tactile feedback keys or Dolphin ( XPL+/RS-232C interface) each with magnetic
mounting and infrared interface ( ordered separately ).
SCANNING: Substantially reduces equipment costs for additional vessels (present or future).
COMMUNICATIONS:
Milltronics Peripherals
Proprietary bipolar communications with AO-10, SAM-20 and BIC-2 peripheral devices,
for respective analog mA output, alarm control relays and RS-232 or RS-422 interface.
and /or
SmartLinx Compatible
Communications ready when equipped with an appropriate Milltronics SmartLinx module.
SPEED: Fast 16/32 bit microprocessor at 16.7 MHz clock speed.
1 vessel (point) per second scanning speed capability.
RELIABILITY: Surface Mount Technology (SMT), also provides for full features in a compact design.
Sonic Intelligence
TM
ensures all measurements are accurate and reliable.
Immune to power interruptions. All programming is stored indefinitely. Dynamic
operating data is retained for one hour and updated immediately on power resumption.
PROGRAMMABLE FEATURES
Typically, a very small percentage of the programmable features require operator alteration. However, for
demanding measurement requirements any operator programmable feature may be adjusted as desired.
Following is a list of some of the features that make the XPL+ easy to program, yet versatile enough to
handle complex level measurement requirements.
GENERAL FEATURES
DIRECT ACCESS: Any operator programmable feature may be accessed directly.
SCROLL ACCESS: Single button "scroll forward", single button "scroll back", to key features.
OPERATION: Select "level","space", or "distance" operation.
MATERIAL: Liquid or Solid; automatically adjusts echo processing with one entry.
RESPONSE: Slow, medium, fast, surge, or turbo response to material level changes, one entry.
UNITS: Display Readings in m, cm, mm, ft, in, %, or any other units desired.
PL-532 8
To Next Page
Loading...
Need help?
General
